Most lane-change and pull-off crashes happen because a driver did not see a vehicle that was there all along. K53 tackles this with a strict observation routine: frequent mirror checks and a look over your shoulder before every sideways move. Examiners mark these checks on the driving test, and the learner’s test asks about them too.
Your three mirrors
| Mirror | What it shows |
|---|---|
| Interior rear-view mirror | The road directly behind you, through the rear window |
| Right side mirror | The lane to your right and vehicles about to overtake |
| Left side mirror | The kerb side: cyclists, motorcycles filtering, the lane to your left |
Setting your mirrors
Adjust all mirrors before you move off, while the vehicle is stationary, after you have set your seat. The interior mirror should frame the whole rear window. Each side mirror should show a sliver of your own car on the inside edge, with the rest showing the lane beside you. Many side mirrors are slightly convex, so vehicles in them look further away than they really are.
How often to check
The K53 standard is to check your rear-view mirror every 5 to 8 seconds, and always:
- Before you signal.
- Before you brake or slow down.
- Before you change lanes, turn, overtake or pull over.
- As you approach any hazard, such as a junction, a pedestrian crossing or road works.
Each check should be a glance long enough to understand what is behind you, not a long stare. Looking too long in the mirror is also marked as a fault.
What is a blind spot?
A blind spot is an area around your vehicle that you cannot see in any mirror. On a car the biggest ones are just behind your shoulders on both sides, where a car, a motorcycle or a cyclist can sit completely hidden. The pillars between the windows also hide pedestrians, especially at junctions and in traffic circles.
The blind-spot check
The only way to see into a blind spot is to look over your shoulder in the direction you are going to move. Leaning forward or moving your head while looking in the mirror does not show you the blind spot. Do the check:
- Before you pull away from the kerb (right blind spot).
- Before you change lanes, as the very last check before you move.
- Before you merge onto a freeway from the on-ramp.
- Before you pull over to the left, and before a left turn where cyclists or motorcycles could be beside you.
Keep the check quick, about half a second, so your eyes are back on the road ahead before anything changes.
The routine, step by step
Pulling away
- Check the interior mirror and the right side mirror.
- Signal right if anyone could benefit from the signal.
- Check the right blind spot over your shoulder.
- Move off only when it is clear.
Changing lanes
- Mirror: interior, then the side mirror on the side you are moving to.
- Signal in good time.
- Blind spot: look over your shoulder on that side.
- Move gradually into the new lane, keeping your speed.
- Cancel the signal.
See how to signal correctly for the signalling part of the routine.
Other people’s blind spots
Trucks and buses have huge blind spots: directly in front, beside the cab on both sides, and behind the trailer. A simple rule: if you cannot see the driver’s face in their mirror, they cannot see you. Do not linger beside a truck, do not cut in close in front of it, and leave space when it turns, because long vehicles swing wide. Motorcyclists should avoid riding in a car’s blind spot for the same reason.
At night
Headlights behind you can dazzle you in the interior mirror. Most mirrors have a small lever underneath that switches to an anti-glare (night) position. Flip it back in daylight. Your side mirrors can be angled slightly down if a vehicle behind has its lights on bright.
Exam-style questions
How can you see if another vehicle is in your blind spot?
- It cannot be done
- Look over your shoulder
- Lean back and forth while looking in your mirrors
Show the answer
Answer: B
A blind spot cannot be seen in the mirrors, so you must look over your shoulder.
When should you adjust your rear-view mirror?
- While driving slowly
- Before you move off, while the vehicle is stationary
- Only when it is dark
Show the answer
Answer: B
Set your mirrors before driving so you are not distracted while moving.
How often does the K53 system expect you to check your rear-view mirror?
- Every 5 to 8 seconds
- Once a minute
- Only before you turn
Show the answer
Answer: A
Frequent checks every 5 to 8 seconds keep you aware of traffic behind you.
Frequently asked questions
Do I check my blind spot before braking?
No. Before braking you check your mirror so you know what is behind you. Blind-spot checks are for sideways moves.
My car has blind-spot warning lights. Do I still need to look?
Yes. The sensors can miss cyclists and pedestrians, and the examiner wants to see you look.
Last checked: 19 November 2026.
Guide 24 of 54 in the free K53 course · See all guides
