Motorcycle control questions use their own numbered diagram: 1 gear lever (left foot), 2 clutch lever, 3 mirrors, 4 front brake lever, 5 throttle, 6 indicator switch, 7 rear brake pedal and 8 handlebars.
Most questions ask which control or combination you use to stop, change gear, turn or control your speed.

The distance it takes the driver of a motorcycle to stop is_____(i) longer on a wet road than a dry road (ii) longer if the vehicle is traveling at a higher speed. (iii) longer if the vehicle is loaded.
- (i) is correct
- (i) and (ii) are correct
- All of the above are correct
- None of the above are correct
Show the answer
Answer: C. All of the above are correct
Stopping distance grows with each of these. A wet road gives less grip, a higher speed covers more ground while you react and brake, and extra weight (a load or a passenger) takes longer to stop.
What controls must we use when going into a sharp turn?
- 1,3,6 and 8 only
- 1,2,3,4,6 and 8 only
- 1,2,4 and 8 only
- 1,3,5,6 and 8 only
Show the answer
Answer: B. 1,2,3,4,6 and 8 only
For a sharp turn you check your mirrors (3), signal with the indicator switch (6), slow down with the front brake (4), use the clutch (2) and gear lever (1) to change down, and steer with the handlebars (8).
What controls must you never use in combination?
(i) 2 and 4.(ii) 4 and 8.(iii) 4 and 7.
- (i) only is correct.
- (ii) only is correct.
- (iii) only is correct.
- All of the above are correct
Show the answer
Answer: B. (ii) only is correct.
Number 4 is the front brake and number 8 the handlebars. Braking hard with the front brake while turning the handlebars can make the front wheel lose grip, so brake before the turn, not during it.
What controls must you use when you are going to make a sharp turn?
(i) 1,3,5,6 and 8 only.(ii) 1,2,4 and 8 only.(iii) 1,2,3,4,6 and 8 only.
- (i) only is correct.
- (ii) only is correct.
- (iii) only is correct.
- All of the above are correct
Show the answer
Answer: C. (iii) only is correct.
For a sharp turn you check your mirrors (3), signal with the indicator switch (6), slow down with the front brake (4), use the clutch (2) and gear lever (1) to change down, and steer with the handlebars (8).
To indicate that you are going to turn you must use number...
(i) 6.(ii) 4.(iii) 8.
- (i) only is correct.
- (ii) only is correct.
- (iii) only is correct.
- All of the above are correct
Show the answer
Answer: A. (i) only is correct.
Number 6 is the indicator switch on the left handlebar. Use it to show other road users that you are about to turn or change lanes.
To change gears you must use numbers...
(i) 1 and 5.(ii) 2 and 7.(iii) 1 and 2.
- (i) only is correct.
- (ii) only is correct.
- (iii) only is correct.
- All of the above are correct
Show the answer
Answer: C. (iii) only is correct.
To change gear you pull in the clutch lever (2) with your left hand and move the gear lever (1) with your left foot.
To stop you must use number...
(i) 4 and 7.(ii) 2 and 7.(iii) 1 and 2.
- (i) only is correct.
- (ii) only is correct.
- (iii) only is correct.
- All of the above are correct
Show the answer
Answer: A. (i) only is correct.
To stop, use both brakes: the front brake lever (4) and the rear brake pedal (7). Using both together gives the shortest, most stable stop.
To turn you must use number...
(i) 8.(ii) 1.(iii) 7.
- (i) only is correct.
- (ii) only is correct.
- (iii) only is correct.
- All of the above are correct
Show the answer
Answer: A. (i) only is correct.
Number 8 is the handlebars, which you use to steer the motorcycle.
To ride faster, you must use number...
(i) 7.(ii) 5.(iii) 4.
- (i) only is correct.
- (ii) only is correct.
- (iii) only is correct.
- All of the above are correct
Show the answer
Answer: B. (ii) only is correct.
Number 5 is the throttle (twist grip) on the right handlebar. Twisting it open makes the motorcycle go faster.
Which lever applies the rear brake on a motorcycle
- 7
- 2
- 4
Show the answer
Answer: A. 7
Number 7 is the rear brake pedal, operated with your right foot.
… is used to accelerate
- 1
- 5
- 8
Show the answer
Answer: B. 5
Number 5 is the throttle (twist grip) on the right handlebar. Twisting it open makes the motorcycle go faster.
Which control is used to increase or decrease motorcycle’s speed?
- 2
- 9
- 5
Show the answer
Answer: C. 5
Number 5 is the throttle twist grip. Opening it speeds you up and closing it slows you down.
Which combination of controls are used to change gears?
- 1 and 2
- 2 and 9
- 4 and 7
Show the answer
Answer: A. 1 and 2
To change gear you pull in the clutch lever (2) with your left hand and move the gear lever (1) with your left foot.
… control is used for turning the motorcycle
- 9
- 8
- 6
Show the answer
Answer: B. 8
Number 8 is the handlebars, which you use to steer the motorcycle.
Which control is used to indicate your intentions?
- 7
- 4
- 6
Show the answer
Answer: C. 6
Number 6 is the indicator switch on the left handlebar. Use it to show other road users that you are about to turn or change lanes.
Which combination of controls is used to stop the motorcycle?
- 4 and 7
- 4 and 9
- 2 and 5
Show the answer
Answer: A. 4 and 7
To stop, use both brakes: the front brake lever (4) and the rear brake pedal (7). Using both together gives the shortest, most stable stop.
To control the speed of the motorcycle you must use …
- 2, 3 and 5
- 4, 5 and 7
- 5, 6 and 9
Show the answer
Answer: B. 4, 5 and 7
You control speed with the throttle (5) to go faster or slower, and with the front brake (4) and rear brake (7) to slow down or stop.
Which control is used to maintain the fuel supply to the motorcycle engine?
- 9
- 3
- 5
Show the answer
Answer: C. 5
Number 5 is the throttle twist grip on the right handlebar. It controls how much fuel reaches the engine, and so the engine speed.
To disengage the engine from the gearbox .. is used
- 2
- 4
- 7
Show the answer
Answer: A. 2
Number 2 is the clutch lever on the left handlebar. Pulling it in disconnects the engine from the gearbox.
Which control is used to change gears?
- 3
- 1
- 9
Show the answer
Answer: B. 1
Number 1 is the gear lever, worked with your left foot.
Before coming to a standstill, which combination controls must be used immediately?
- 1, 3 and 5
- 4, 6 and 9
- 2, 4 and 7
Show the answer
Answer: C. 2, 4 and 7
Just before you stop, pull in the clutch (2) so the engine does not stall, and keep braking with the front brake (4) and rear brake (7).
The … is used to check traffic to the rear
- 3
- 2
- 9
Show the answer
Answer: A. 3
Number 3 is the mirrors. They let you check the traffic behind you without turning your head.
When 4 and 7 are used, the distance it takes for your motorcycle to stop is …
(i) longer if carrying a passenger. (ii) longer on a wet surface. (iii) longer if riding at a higher speed.
- (i) and (iii)
- (i), (ii) and (iii)
- (ii) and (iii)
Show the answer
Answer: B. (i), (ii) and (iii)
Stopping distance grows with each of these. A wet road gives less grip, a higher speed covers more ground while you react and brake, and extra weight (a load or a passenger) takes longer to stop.
To turn a sharp curve on the road you must use …
- 1, 3, 5 and 7
- 2, 6, 8 and 9
- 1, 2, 3, 5, 7 and 8
Show the answer
Answer: C. 1, 2, 3, 5, 7 and 8
For a sharp curve you check your mirrors (3), slow down with the throttle (5) and rear brake (7), change down with the clutch (2) and gear lever (1), and steer (8). You do not signal for a bend in the road, so the indicator (6) is not used.
To regulate the fuel supply to the engine you will make use of the
- 5.
- 2.
- 4.
Show the answer
Answer: A. 5.
Number 5 is the throttle twist grip on the right handlebar. It controls how much fuel reaches the engine, and so the engine speed.
In the case of a motorcycle the lever that applies the front brake and activates the stop lamp is?
- 4.
- 1.
- 8.
Show the answer
Answer: A. 4.
Number 4 is the front brake lever on the right handlebar. Squeezing it applies the front brake and switches on the brake light.
On a motorcycle the lever that applies the rear brake is ...
- 7.
- 2.
- 9.
Show the answer
Answer: A. 7.
Number 7 is the rear brake pedal, operated with your right foot.
The following controls are used in combination to bring the motorcycle to a complete standstill
- 1 and 2.
- 2 and 9.
- 4 and 7.
Show the answer
Answer: C. 4 and 7.
To stop, use both brakes: the front brake lever (4) and the rear brake pedal (7). Using both together gives the shortest, most stable stop.
The following control is used to increase or decrease the speed of a motorcycle
- 6.
- 9.
- 5.
Show the answer
Answer: C. 5.
Number 5 is the throttle twist grip. Opening it speeds you up and closing it slows you down.
The following controls are used to control the speed of a motorcycle.
- 4, 5, 7.
- 3, 4, 1.
- 1, 3, 7.
Show the answer
Answer: A. 4, 5, 7.
You control speed with the throttle (5) to go faster or slower, and with the front brake (4) and rear brake (7) to slow down or stop.
The switch to activate indicator signals and thereby to communicate your intentions, is ...
- 4.
- 6.
- 2.
Show the answer
Answer: B. 6.
Number 6 is the indicator switch on the left handlebar. Use it to show other road users that you are about to turn or change lanes.
The twist grip that controls the engine speed, is ...
- 7.
- 2.
- 5.
Show the answer
Answer: C. 5.
Number 5 is the throttle twist grip on the right handlebar. It controls how much fuel reaches the engine, and so the engine speed.
The following controls are used to change gears...
- 1 and 2.
- 1 and 7.
- 4 and 7.
Show the answer
Answer: A. 1 and 2.
To change gear you pull in the clutch lever (2) with your left hand and move the gear lever (1) with your left foot.
The following control is used to indicate that you are going to turn ...
- 6.
- 4.
- 5.
Show the answer
Answer: A. 6.
Number 6 is the indicator switch on the left handlebar. Use it to show other road users that you are about to turn or change lanes.
To ride faster, you must use control?
- 5.
- 6.
- 7.
Show the answer
Answer: A. 5.
Number 5 is the throttle (twist grip) on the right handlebar. Twisting it open makes the motorcycle go faster.
To stop, you must use the following controls ...
- 6 and 7.
- 4 and 1.
- 4 and 7.
Show the answer
Answer: C. 4 and 7.
To stop, use both brakes: the front brake lever (4) and the rear brake pedal (7). Using both together gives the shortest, most stable stop.
In order to turn the motor cycle, you must use control ...
- 6.
- 2.
- 8.
Show the answer
Answer: C. 8.
Number 8 is the handlebars, which you use to steer the motorcycle.
Which control is used by the rider of a motorcycle to monitor the traffic situation to the rear of the motorcycle?
- 2.
- 3.
- 8.
Show the answer
Answer: B. 3.
Number 3 is the mirrors. They let you check the traffic behind you without turning your head.
Which control is used to disengage the engine from the gearbox?
- 3.
- 4.
- 2.
Show the answer
Answer: C. 2.
Number 2 is the clutch lever on the left handlebar. Pulling it in disconnects the engine from the gearbox.
Which control is used to check traffic to the rear?
- 3.
- 2.
- 8.
Show the answer
Answer: A. 3.
Number 3 is the mirrors. They let you check the traffic behind you without turning your head.
Which control is used when the rider of a motorcycle wants to signal his intention to steer to the left?
- 6.
- 4.
- 8.
Show the answer
Answer: A. 6.
Number 6 is the indicator switch on the left handlebar. Use it to show other road users that you are about to turn or change lanes.
Which controls must be used in combination immediately before coming to a standstill?
- 2 , 4 and 7.
- 2 , 6 and 7.
- 2 , 5 and 1.
Show the answer
Answer: A. 2 , 4 and 7.
Just before you stop, pull in the clutch (2) so the engine does not stall, and keep braking with the front brake (4) and rear brake (7).
In order to negotiate a sharp turn in the road the following controls must be used?
- 1, 3, 5 and 7.
- 1, 2, 4, 5, 7 and 8.
- 1, 2, 3, 4, 5, 7 and 8.
Show the answer
Answer: C. 1, 2, 3, 4, 5, 7 and 8.
To ride through a sharp turn you check your mirrors (3), roll off the throttle (5), brake with the front (4) and rear (7) brakes, change down with the clutch (2) and gear lever (1), and steer with the handlebars (8).
Which lever is used to change the gears?
- 3.
- 9.
- 1.
Show the answer
Answer: C. 1.
Number 1 is the gear lever, worked with your left foot.
... is used to accelerate.
- 1.
- 5.
- 8.
Show the answer
Answer: B. 5.
Number 5 is the throttle (twist grip) on the right handlebar. Twisting it open makes the motorcycle go faster.
An engine with a cylinder capacity not exceeding ... (cubic centimetres) is forbidden on a freeways.
- 50 cc
- 750 cc
- 250 cc
Show the answer
Answer: A. 50 cc
Motorcycles with an engine of 50 cm³ or less are too slow for freeway speeds, so they may not use a freeway.
